How to check the concrete pump comprehensively

The service life of concrete pump has always been the concern of the majority of construction parties. If you want to extend the service life of concrete pump, you must pay attention to the maintenance of concrete pump. Many customers only know that they should pay attention to daily maintenance, but how to maintain and check?

The inspection of concrete pump is usually based on different parts, and the inspection cycle is also different. Under normal circumstances, such as some easily damaged parts, the inspection cycle will be shorter. For some fixed parts, the inspection cycle should be longer. Specifically, the inspection cycle of main components of concrete pump is as follows:

1. Daily inspection

Daily inspection includes appearance damage and deformation, loose exposed parts, operation and performance changes, oil leakage, hose damage, lack of lubricating grease at lubricating points, unsafe driving factors, etc.

2. Monthly inspection

When pumping 2000 cubic meters of concrete or every month, the following inspection can be done, such as damage of slide valve, wear of conveying pipe, reduction of hydraulic oil, forced lubrication of lubricating points, routine maintenance of automobile parts, etc.

3. Half year inspection

If the pumping concrete is 12000 cubic meters or half a year, the following inspection can be carried out, such as damage to the lower shell of slide valve and conveying cylinder, deterioration of electrical components and hydraulic oil, damage of boom and routine maintenance of automobile parts.

4. Annual inspection

If the pumping concrete reaches 24000 cubic meters or reaches one year, the following inspection can be carried out, such as mixing device, mixing oil motor, rotary oil motor, water pump, each oil pump, hydraulic oil replacement, etc.

• prev：EnTeng Machinery Co., Ltd. specializes in alloy steel
• next：Tunnel concrete wet spraying manipulator is widely used in t